ASTM B211/B211M

$44.00

Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

2019 Edition

Published by ASTM International, 01/01/2019

PDF

All of our standards are available in PDF (Portable Document Format), an electronic, downloadable format.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

Description

ASTM B211/B211M, 2019 Edition – Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

ASTM B211/B211M covers rolled or cold-finished aluminum and aluminum-alloy bar, rod, and wire and includes the following UNS alloy designations: A91060, A91100, A92011, A92014, A92017, A92024, A92219, A93003, A95052, A95056, A95154, A96061, A96110, A96262, and A97075. The temper conditions covered by this specification include: O, H14, H18, H12, H16, H112, F, T3, T4, T42, T451, T6, T62, T651, T36, T351, T851, H32, H34, H36, H38, H111, H192, H392, T 89, T94, T9, T73, and T7351. The products shall be produced either by hot extruding and cold finishing or by hot rolling with or without cold finishing. Bars, rods, and wires shall conform to the chemical composition requirements prescribed for aluminum, silicon, iron, copper, manganese, magnesium, chromium, zinc, bismuth, lead, and titanium, and to the specified tensile properties such as tensile strength, yield strength, and elongation. Requirements for quality assurance, heat treatment, chemical analysis, tension test, heat-treat response, bend testing, and stress-corrosion resistance and stress-corrosion cracking test are detailed.

General Product Information:

Revision 2019 Edition, January 1, 2019
Document Type PDF
Document Language English
Pages 13
Publisher ASTM International (ASTM)
Status Current

Preview

ASTM Volume

02.02: Aluminum And Magnesium Alloys

The specifications in this volume cover aluminum, aluminum alloys, and aluminum-covered steel, including bars, rods, wire, shapes, castings, forgings, fasteners, pipes, tubes, sheet, plates, foil, and cable. It also includes ANSI H35.2 American National Standard on Dimensional Tolerances for Aluminum Mill Products.

Other standards fix the property requirements for magnesium-ingot and magnesium-alloy castings, including sheet, forgings, anodes, bars, rods, and shapes; and measure indentation hardness, shear testing, tension testing, and ultrasonic inspection.